94 del sol setup
Engine:
- jdm b16 sir II head / 1993 b18a1 LS block 81.25mm bore
ITR parts
- throttle body
- intake manifold
- exhaust cam
- cdm tranny 4.40 final drive
- 1995 integra LS fifth gear .714:1
- inner valve springs
- retainers
CTR parts
- outer valve springs
- intake cam
- RC 310 Injectors
- skunk2 adjustable cam gears
- AEM cold air intake
- DC sports 4-1 ceramic header
- 2.25" open exhaust Thermal R&D muffler
- b & m fuel pressure regulator and gauge
- milled .020"
- ITR Exedy Clutch and Pressure Plate
- Hondata Intake Manifold Gasket
- mild port work on the head by Unleaded Racing
- port matched intake manifold
- 3 angle grind on all valves
- LS rods
- pr3 .25 mm over pistons *81.25mm bore*
- ARP rod bolts
- ARP head studs
Electronics:
- p28 - Hondata Stage 2 tuned by me :)
- Apexi V-AFC
Suspension
- KYB AGX
- Grounc Control Coilovers
- GS-R strut tower bar
OLD TUNES! these are b16 tunes!!
The fuel pressure is set at 38 psi for these maps. Cam gears were at +2 intake, -2 exhaust. The hondata system was tuned on a mustang dyno, my .bin files are available for download here:
BaseLine MAP
Tuned Map
Return to Index page