This is turning into a "bitch about the Taurus in every thread" board. Cut it out.
We may earn a small commission from affiliate links and paid advertisements. Terms
This is turning into a "bitch about the Taurus in every thread" board. Cut it out.
Is everything wired up correctly? Why is the tach wiggling with a neutral rev?
Not sure if this explains it but the axles weren't even back on yet, this was when the car was still up on stands. But what do you mean wires up correctly?
First start up? Old video or new D-Series? Or after main seal? I figured so since its not looking like a K under the hood (TB on back passenger side of engine bay being Rev'd). What are the CEL's
Looks like this thread got a hair cut (sort to speak) by admin.
https://hondaswap.com/reference-materials/88-ecu-error-codes-29109/
reference materials. lots of good info there.
Good info in that link. Your 2-pin plug is under the passenger kick panel (above the ECU). Its near the glovebox. I have 2 plugs there. It's the smaller one. Piece a wire or open up a paper clip to connect the two lines of that plug together.