We may earn a small commission from affiliate links and paid advertisements. Terms
Quoted post[/post]]
power steering hose?
F22 waterneck
maybe F22 EGR
coolant
distributor cap
any wiring connectors, wire, solder, tools.
band aids.........
maybe some fuel line, but nothing special. I haven't done your particular swap.Quoted post[/post]]
so i need to get a new power steering hose? is there any other hoses/lines/parts anything that i will need that im forgetting because i wanna get all my parts to get it all done 1st attempt.
the new motor might come with a clipped hose, but I doubt you will recieve a whole one. You can try mounting up the F22 pump. Some have done it with success. You don't want to drive the car if the pump is not connected properly.Quoted post[/post]]is the power steering hose swap required? the new motor doesnt come with it?
Once again, no. If it saves you wiring, and only has two bolts, then I personally would swap it. Make your own call.Quoted post[/post]]is changing the EGR valve required?
Quoted post[/post]]as for the waterneck the f22 has 2 switches and the jdm only needs 1 using the f22 waterneck will tell the jdm engine to turn on both correct?
Quoted post[/post]]
well is the F22 axels the same as the Uk 2.0 shoc f20a non vetch